Case Super Stock Puller. 90% complete. Needs about $19000 to finish. Selling now for $60000. Call Courtny at 320.424.1596 for more information.
↧
Case Super Stock Puller (no replies)
↧
jd 466 parts m&w manifoild stock 8.1 parts (no replies)
466 7.6 block $750
466 crank oil pump crank with gear $750
466 large journal cam open rpms with gear $300
Stock liners $300
M&w exhaust manifold $200
Stock 8.1 liners
8.1 pistons
Cleaning shop taking a break from pulling stuff needs to go
8144423525
466 crank oil pump crank with gear $750
466 large journal cam open rpms with gear $300
Stock liners $300
M&w exhaust manifold $200
Stock 8.1 liners
8.1 pistons
Cleaning shop taking a break from pulling stuff needs to go
8144423525
↧
↧
John Deere 6030 sleeves Sold (no replies)
I have a set of 6030 sleeves bored to 4.875". These sleeves were in the block but never used...$500.00 o.b.o. Please, email jkrusenklaus@aol.com with your questions or offers.
Thanks, Jeff
Thanks, Jeff
↧
Tractor pull West Union Ohio today heavy to light 10 05 14 (no replies)
Tractor pull West Union Ohio today heavy to light southern Ohio auntie trackable rules way in at noon pull starts at one for questions please call 937-763-3609
↧
1 year old 24.5-32 puller 2000 (no replies)
1 year old puller 2000 24.5-32 cut by Hoosier Tire Cutting, have been sharpened once mid season Contact. Justin 812-360-6283
↧
↧
Ford LSS/LLSS (no replies)
Ford LSS/LLSS for sale. 7700 Trans and rear, wedge chassis. 401 ci alky motor complete hat to pan,3disk atlas clutch and steel flywheel, clutch will need disks and floaters for next season. Can assist with with fuel and ignition if needed. Was a light super in 2014, would be perfect as a limited light super. Also have a diesel head complete with manifolds, injectors and lines. Gear belt driven multistage pump. Tractor rods and pistons. 7.8 truck rods and pistons. Header style exhaust manifold for truck head. TH08 turbo with housings. Several other parts available. Everything must go and is priced accordingly. Call 585-322-6368. Thank you.
↧
John Deere Alky Superstock (no replies)
3 charger, 505 GMS, Indy head, billet rockers, Billet crank, Msd8 . Component Full Pull Chassis, Binderlite 8360R sheet metal, scs reverser, also have profab 3 speed, 30.5 HPs $115,000
Scott Holtgrew 402-340-5494
Scott Holtgrew 402-340-5494
↧
cat 3406b (no replies)
For sale, cat 3406b series engine, dis assembled on pallets. Jake brakes on it. Mostly complete, no starter or turbocharger, but all long block assembly parts are there. Had bad orings on sleeves, otherwise complete and in good condition.
$1250
715-790-1869
$1250
715-790-1869
↧
4630 PRO FARM CHASSIS FOR SALE (no replies)
John Deere 4630 Rolling Chassis For Sale.
- 20.8x38 BFG Power Grip Tires on 9 Bolt 21" Pressed Steel Wheels (10 runs since tires were cut)
-Weld on Hubs
-4620 Dry Bell Housing (Quad was removed, now just has 8 stock forward gears) Also has 1 & 3/4" 27 Spline Input Shaft
-Powder coated Haslag Roll Cage with seat & 5 point harness
-Rack & Pinion Steering
-2940 Mechanical Brake Cylinder (it has new brake pads and new brake plates which was installed in 2013)
-Has Front, Middle, & Rear Weight Brackets (made for john deere weights) Also has Wheelie Bars & Tie Bars
-Frozen Boost Intercooler with Ice Box, Lines & Pump, Also some air piping is included
-FVP Fass Electric Fuel Supply Pump, Lines, Filter Housing, ect. is all hooked up to Fuel Tank
-Snow Water Injection Pump
-Radiator with water pump also included
-Custom Dash with bd power mini datalogger that reads boost pressure and pyro
-Tractor Weighs around 9,100 lbs. with driver
$16,000 obo
Serious inquires only please.
If interested call Corey @ 740-213-5235
Located in Southeastern Ohio
![20130518_150120_zps20b532f0.jpg]( "20130518_150120_zps20b532f0.jpg")
(chrome exhaust pipe not included with tractor)
![20140822_181937_zpsd352ecc7.jpg]( "20140822_181937_zpsd352ecc7.jpg")
![20140822_183037_zpsa8ad68ae.jpg]( "20140822_183037_zpsa8ad68ae.jpg")
- 20.8x38 BFG Power Grip Tires on 9 Bolt 21" Pressed Steel Wheels (10 runs since tires were cut)
-Weld on Hubs
-4620 Dry Bell Housing (Quad was removed, now just has 8 stock forward gears) Also has 1 & 3/4" 27 Spline Input Shaft
-Powder coated Haslag Roll Cage with seat & 5 point harness
-Rack & Pinion Steering
-2940 Mechanical Brake Cylinder (it has new brake pads and new brake plates which was installed in 2013)
-Has Front, Middle, & Rear Weight Brackets (made for john deere weights) Also has Wheelie Bars & Tie Bars
-Frozen Boost Intercooler with Ice Box, Lines & Pump, Also some air piping is included
-FVP Fass Electric Fuel Supply Pump, Lines, Filter Housing, ect. is all hooked up to Fuel Tank
-Snow Water Injection Pump
-Radiator with water pump also included
-Custom Dash with bd power mini datalogger that reads boost pressure and pyro
-Tractor Weighs around 9,100 lbs. with driver
$16,000 obo
Serious inquires only please.
If interested call Corey @ 740-213-5235
Located in Southeastern Ohio
↧
↧
Kansas to Colorado enclosed transport available (no replies)
October 9th
Direct enclosed transport is available from:
Hays, KS
to ...
Denver, CO
Parts and/or vehicles ....
Vehicle(s) have to steer straight & roll freely on good tires that hold air
Engine - tranny - tires - glass - trim - panels
25 feet fully enclosed
78 inch maximum height
7000 pound maximum capacity
No text messages please ...
Call Jim
(260) 804-6695
Direct enclosed transport is available from:
Hays, KS
to ...
Denver, CO
Parts and/or vehicles ....
Vehicle(s) have to steer straight & roll freely on good tires that hold air
Engine - tranny - tires - glass - trim - panels
25 feet fully enclosed
78 inch maximum height
7000 pound maximum capacity
No text messages please ...
Call Jim
(260) 804-6695
↧
IH Pulling Parts (no replies)
Front frame will fit 06-86 series bell housings,has component style tubing axle with tubing ski bars,set up for truck style front timing cover.11' from center of rear axle to front of frame excluding tow ring.Has 6 bolt ag hubs with new bearings and seals.Steering needs finished but can finish for additional cost $2500.00.Turbonetics 3x3 smooth bore turbo has approx. 15 hooks since bought new,includes exh flange and 5"elbow $1500.00.Stainless fuel/water tank combo fuel side holds 4.5 gal,water side holds 1.5 gal. cost $850.00 new,sell for $500.00 or b.o.Can send pics via phone.Call 1-724-954-5573,if no answer please leave message with return number and I will return your call asap Thanks Donnie
↧
Massey 101 Senior Pulling Tractor (no replies)
1946 Model Massey 101 Senior
Pulling Tractor
![102_0571.jpg]( "102_0571.jpg")
![102_0572.jpg]( "102_0572.jpg")
![102_0573.jpg]( "102_0573.jpg")
6 Cyl Chrysler Industrial Engine (Gas)
100 Horse Power
Pulling RPM: 4500 - 5500
Balanced Engine
Steel Flywheel
2 Different Carburetors - Holley Downdraft or Large Zenith Updraft
Proto-Cut Tires (14x9 151 Firestones)
Spare Block & Spare Heads & many other spare parts
More Pictures at: http://taintermachine.com/massey-pulling-tractor/
Call Steve at 715-308-0612
$4700 - Negotiable
Pulling Tractor
6 Cyl Chrysler Industrial Engine (Gas)
100 Horse Power
Pulling RPM: 4500 - 5500
Balanced Engine
Steel Flywheel
2 Different Carburetors - Holley Downdraft or Large Zenith Updraft
Proto-Cut Tires (14x9 151 Firestones)
Spare Block & Spare Heads & many other spare parts
More Pictures at: http://taintermachine.com/massey-pulling-tractor/
Call Steve at 715-308-0612
$4700 - Negotiable
↧
Case and Cummins shop cleaning (no replies)
5.9 Cummins parts. used
water pump
oil pump
oil filter housing and cooler
oil pick up tube
two sets off pistons, 1993 and 1995
custom exhaust manifold to move turbo out front of engine, would work for tractor, just add turbo plate.
Case parts from 30 series engine
push rods
water pump
lifters
Case oil pressure gauge
Belly bar for Case trans heavy
5" Auto Meter recall tach
Summit elec. fuel pump and adjustable regulator with pressure gauge.
Make offer on parts.
email with qustions or to get pics. 930case@att.net
water pump
oil pump
oil filter housing and cooler
oil pick up tube
two sets off pistons, 1993 and 1995
custom exhaust manifold to move turbo out front of engine, would work for tractor, just add turbo plate.
Case parts from 30 series engine
push rods
water pump
lifters
Case oil pressure gauge
Belly bar for Case trans heavy
5" Auto Meter recall tach
Summit elec. fuel pump and adjustable regulator with pressure gauge.
Make offer on parts.
email with qustions or to get pics. 930case@att.net
↧
↧
shop cleaning (no replies)
Small block john Deere parts 466 p pump block $800 new open rpm can w steel nose and rei gear $600 6 pistons and 6 liners liners cut for fire rings and pistons cut for a 55 series head $800 5 rods w rei rod bolts $400 crank w spun rod (fixable) $300 (crank is drilled for 8 bolt pattern) oil pump w billet extension for deep sump pan $300 no reasonable offers refused and ?'s call or text 315 368 7708
↧
Ih Hot farm parts (no replies)
Flat tappet cam w adjustable gear (212/232) $300 Obo
Billet roller cam w adjustable gear. (236/242) make offer
Atlas trans 1 under direct 1 over 2 over. Big input shaft bearing supports $3000
Atlas 3 disk peddle clutch two runs since refurbished $1200 Obo
Harts 5.22 stock body injectors $1000 Obo
Link injectors 5.22 stock body injectors $500 obo
Columbus 5.22 stock body long tipped injectors $1500
706 ring and pinion matched nice shape make offer
Aluminum frame rails and homemade front end off 806 has 6 bolt hubs $800obo
Harts 3x3 hot farm turbo $3500 Obo
Precision 6 blade intake wheel and smooth cover JUST WHEEL AND COVER (match set) $800 obo
Ross 466 billet coated Pistons only used to dyno 3 times $1600 Obo
James 7158961917
Billet roller cam w adjustable gear. (236/242) make offer
Atlas trans 1 under direct 1 over 2 over. Big input shaft bearing supports $3000
Atlas 3 disk peddle clutch two runs since refurbished $1200 Obo
Harts 5.22 stock body injectors $1000 Obo
Link injectors 5.22 stock body injectors $500 obo
Columbus 5.22 stock body long tipped injectors $1500
706 ring and pinion matched nice shape make offer
Aluminum frame rails and homemade front end off 806 has 6 bolt hubs $800obo
Harts 3x3 hot farm turbo $3500 Obo
Precision 6 blade intake wheel and smooth cover JUST WHEEL AND COVER (match set) $800 obo
Ross 466 billet coated Pistons only used to dyno 3 times $1600 Obo
James 7158961917
↧
P-pump and turbos (no replies)
For sale : FVP p3000 pump 13ml plungers $2000 b/o will easily fit AC,Ford,JD
FVP s400 with Columbus billet wheel 3x3.6 w 132ex.$2000 b/o also 4 le 2.6x3.1 bottom of twin$500 or $2350 for the pair.
PH. 716-866-2115. Also have a 301 diesel and 301 gas cranks set up for big gear for front drive oil pump
Gas $1000 fresh and ready, diesel $500 used and straight
FVP s400 with Columbus billet wheel 3x3.6 w 132ex.$2000 b/o also 4 le 2.6x3.1 bottom of twin$500 or $2350 for the pair.
PH. 716-866-2115. Also have a 301 diesel and 301 gas cranks set up for big gear for front drive oil pump
Gas $1000 fresh and ready, diesel $500 used and straight
↧
dt466 jd pistons (no replies)
Used pistons and sleves in good shape jd 466 the first 100 bucks takes them 270 566 2901
↧
↧
REI IH 4.75 sleeves (no replies)
6- 4.75 sleeves for IH. Riverside Engines Like new. $650 call 715-781-3238
↧
SBJD Parts (no replies)
9 Bolt Polished aluminum rims 25 inches wide 11 inch offset. 1200
SBJD cylinder head by GMS ran on a Super Farm....filled 1750
Stock 55 series Cylinder Head no valves or springs....750
5hole 25 dual feed SBJD injectors 800.......731-676-7785
SBJD cylinder head by GMS ran on a Super Farm....filled 1750
Stock 55 series Cylinder Head no valves or springs....750
5hole 25 dual feed SBJD injectors 800.......731-676-7785
↧
4010 rear end with GMS 3 speed transmission (no replies)
4010 rear end housing with 3 speed GMS transmission gears. Ratios are 23.37 / 21.26 / 19.94. This has axle housings with 9 bolt hubs welded on. Also has cage. $6750.00 call Davey. 301 992 4885.
↧